Single-component, deformable, improved cement-based adhesive with extended open time and double mixing ratio for glueing ceramic tiles, glass mosaic and natural stone not affected by moisture. Product to be used in a thixotropic or self-wetting consistency.
For
floors and walls. For indoor and outdoor use.
PROFESSIONAL USE ONLY
For laying:
- all types of ceramic material both indoors and outdoors (porcelain stoneware, twice-fired,
single-fired)
- stone materials, so long as they are dimensionally stable and not affected by moisture
- cotto tiles
- glass mosaic
-
split tiles in general.
Suitable substrates:
- Cement-based screeds and plasters
- Cellular concrete
- Brick, or natural stone walls
- Cured concrete floor slabs
- Precast concrete panels
- Cement-based self-levelling screeds
- Screeds embedding floor-heating
systems (water or electric)
- Old floors in glazed ceramic tiles, porcelain stoneware tiles, bricks, marble and natural stones
- Insulating panels made of cork, polyurethane foam, polystyrene foam, rock mineral wool,
glass mineral wool and
fiber cement, so long as they are rigidly fixed
- Gypsum, scagliola or anhydrite substrates after application of F.28/G APPRETTO.
- Anhydrite screeds after sanding and application of F.28/G APPRETTO.
- Cement-based and acrylic waterproofing
mortar such as F.72 ELASTOMALTA A+B, MONO
or F.26 ELASTOGUAINA.
- Polyethylene sheathing for waterproofing and desolidarizing substrates
- Outdoor facades:
- the substrate must provide ≥ 1.0 N/mm2 tensile strength
- the cladding
material must weigh ≤ 40 kg/m2
- it is advisable to consider whether safety fastenings (hooks) are required if the longer side
of the tiles exceeds 30 cm.
- Swimming pools.
Coverage
3 – 8 kg/m2
Application
Notched trowel
Packaging
25 kg bags
TECHNICAL DATA
Classification according to EN 12004 (ISO 13007-1): C2E S1
Appearance: Pre-mixed white or grey product
Toxicity: Consult the Safety Data Sheet.
Mixing ratio:
28% normal consistency
32% self-wetting consistency
Volumic
mass of mixture (kg/m3): 1550
Application temperature: from +5°C to + 35°C
Open time: ≥ 30 minutes EN 1346
Adjustability time: ≥ 45 minutes
Pot-life of mixture: ≥ 4 hours
Treadable: after 24 hours
Grouting: after
24 hours for floors – 4/6 hours for walls
Ready for use: 36 hours
Final hardening: 7 days
Temperature resistance: from -30°C to +90°C
EMICODE: EC1R - Ultra-low emission
Storage time: 12 months in unopened packaging in
a dry place