Pre-mixed, salt-resistant mortar to be machine-applied prior to application of F.78 MUROSAN LIGHT RISANA insulating and dehumidifying plasters. Semi-fluid consistency.
Easily workable on both vertical surfaces and ceilings. Improves adhesion and chemical-physical resistance to the soluble salts of macro-porous dehumidifying plaster.
F.78 MUROSAN LIGHT RINZAFFO must be used as a first layer, applied by machine straight onto clean masonry after the old plaster has been removed and before application of F.78 MUROSAN LIGHT RISANA, in the following cases:
•
Application of dehumidifying plasters on masonry strongly affected by rising damp.
• Application of dehumidifying plasters on the indoor and outdoor walls of buildings, of even recent construction, affected by rising damp.
• Application
of dehumidifying plasters to the masonry of structures situated in lagoon areas or near the sea.
• Application of dehumidifying plasters on walls in stone, bricks and tuff.
• Creation of new dehumidifying plaster surfaces on structures
made of stone (especially porous types, like limestone) and/or bricks, even when not properly fired (e.g. walls, pillars, vaults, etc.) and whenever saline efflorescence is a problem.
For indoor and outdoor use.
PROFESSIONAL USE ONLY
Coverage
7.5-8 kg/m2 (per 5 mm of thickness).
Packaging
25 kg bags
TECHNICAL DATA
Appearance: Grey powder
Volumic mass of powder (g/cm3): 1,00-1,10
Volumic mass of mixture (kg/m3): 1900
Mixing ratio: Approx. 18%.
Consistency of mixture: pliant
Hazard classification: Consult the technical
and safety data sheets for more details
Application temperature range: from +5°C to + 35°C
Maximum size of aggregate: 2.5 mm
Pot-life of mixture: approx. 60 minutes
Maximum thickness that can be applied: 5 mm
Storage: 12 months
in original packaging in a dry place