Highly-performing, waterproof, solvent-free two-component polyurethane adhesive with permanent elasticity. Suitable for laying all types of ceramic tiles, natural and recomposed stones onto any substrate used in the building industry, metal included.
For
floors and walls, indoors and outdoors. It can be applied on vertical surfaces without slumping.
Suitable for users allergic to epoxy and epoxy-polyurethane products.
Very low emission level of volatile organic compounds (VOC).
PROFESSIONAL
USE ONLY
For the lying of:
- vitreous mosaic and all types of ceramic tiles including klinker and porcelain also large-format;
- all types of tiles overlaying existing floors;
- cotto, marble, natural and recomposed stones of every type;
- wooden boards.
Suitable
substrates:
- cement-based screeds and plasters, hammered or bush-hammered concrete, cellular concrete;
- cured concrete slabs;
- self-leveling cement-based screeds;
- heated screeds, existing ceramic floors;
- anhydrite screeds previously
sanded;
- industrial environments also subject to heavy traffic, terraces and balconies;
- commercial environments (supermarkets, offices ...);
- large surfaces (shopping centres, airports, etc...);
- panels in cork or expanded polyurethane
or plasterboard (free from dust), also with waterproofing treatment, as long as they are rigidly fixed;
- gypsum and scagliola;
- metal surfaces previously degreased (sheets, metal ladders etc...);
- existing floors in wood or dewaxed parquet,
wooden floorboards;
- PVC, fibre cement, polyester, etc...;
- waterproofing cement-based mortars such as F.72 ELASTOMALTA or three-component epoxy treatments (F.71 ACQUASTOP).
Coverage
2 – 5 kg/m2
Application
Notched trowel
Packaging
10 kg buckets (8,8+1,2) or 5 kg buckets (4,4+0,6) on pallets
TECHNICAL DATA
COMP. A / COMP. B
Appearance: Thixotropic paste / Liquid
Colour: White / Brown
Hazard classification: Consult the Safety Data Sheet / Consult the Safety Data Sheet.
Density (g/cm3): 1,6 / 1,2
Dry solids content (%): 100
/ 100
Brookfield viscosity (mPa*s): 6.000.000 (rotor F - rpm 1) / 150 (rotor 1 - rpm 100)
Mixing ratio: in weight 88:12
Consistency of mix: Thixotropic paste
Density of mix: 1,5 g/cm3
Brookfield viscosity (mPa*s): 2.500.000 (rotor F
- rpm 1)
Pot life of mix: 20/30 minutes
Application temperature: from +5°C to + 30°C
Open time: 20 minutes EN 1346
Adjustment time: 70 minutes
Setting time Start: 4,5 hours Finish: 7 hours
Set to foot traffic: 12 hours
Grouting
of joint: 12 hours
Ready for service: 7 days
Thermal resistance: from -40°C to +100°C
Storage: 12 months in original packaging in a dry place