Two-component structural low-viscosity epoxy adhesive with high mechanical strength for all the substrates commonly used in building. Suitable for: • Re-casting, bonding mortars, repairing cracks…
Two-component structural low-viscosity epoxy adhesive with high mechanical…
Fast-drying two-component epoxy adhesive with no vertical slip and a high mechanical strength for repairing, glueing and structurally reinforcing parts in concrete or reinforced concrete, natural…
Fast-drying two-component epoxy adhesive with no vertical slip and a high…
Ultra-fast setting mouldable pre-mixed powder based on special binders, quartz aggregates and synthetic additives. Does not crack or shrink. Develops a high mechanical strength within a very short…
Ultra-fast setting mouldable pre-mixed powder based on special binders, quartz…
Single-component cement-based product for protecting reinforcing rods. Suitable for: • Rust-inhibiting protection for rust-free iron reinforcing rods, cleaned up to degree SA 2.5 (almost white metal…
Single-component cement-based product for protecting reinforcing rods. …
Fibre-reinforced, fast setting cement-based mortar with a low modulus of elasticity for levelling horizontal and vertical surfaces. Excellent workability and high bonding capacity on all the normal…
Fibre-reinforced, fast setting cement-based mortar with a low modulus of…
Pre-mixed fiber-reinforced mortar based on high-strength cements such as PTL 52.5R and special additives able to compensate the structural shrinkage that occurs when the cement is cured. Highly…
Pre-mixed fiber-reinforced mortar based on high-strength cements such as PTL…
Fast-drying cement-based mortars with a low modulus of elasticity and controlled shrinkage for restoration on concrete structures and successive float finish. No vertical slip. F.76 TIXO is…
Fast-drying cement-based mortars with a low modulus of elasticity and…
Thixotropic cement-based, fast-setting, class R4 fiber-reinforced structural mortar with compensated shrinkage for refurbishing and smoothing concrete. To be applied in 3 to 40 mm coats. Product with…
Thixotropic cement-based, fast-setting, class R4 fiber-reinforced structural…
Cement-based quartz finishing product with a high adhesion and a low modulus of elasticity which can be applied with a trowel in order to achieve a smooth finish for concrete and cement-based…
Cement-based quartz finishing product with a high adhesion and a low modulus of…
Universal cement-based smoothing mortar with improved bonding. Based on cement, silicious sands and special additives. To use in up to 3 mm layers per coat. Fine float finish. Excellent applicability…
Universal cement-based smoothing mortar with improved bonding. Based on cement,…
Extremely flexible, transpiring, waterproofing, two-component (powder and latex), fiberreinforced cement-based final coating mortar. Once the product has hardened, it forms a flexible, waterproof…
Osmotic cement-based mortar for waterproofing underground masonry, structures used for holding water (also drinkable - the product is certified) and cellars in general. The mortar is also ideal for…
Osmotic cement-based mortar for waterproofing underground masonry, structures…
Highly penetrating, transparent and transpiring water-repellent liquid silicone in a watery solution. No filming action. Makes the surfaces water-repellent without creating a film and without…
Highly penetrating, transparent and transpiring water-repellent liquid silicone…
Water-repellent liquid based on siloxane polymers with a high penetration power in a solvent solution. No filming action. Makes the surfaces water-repellent, reducing the absorption of water, smog…
Water-repellent liquid based on siloxane polymers with a high penetration power…
Synthetic latex specifically formulated as an additive for sand-cement mortars and bonding mortars. Totally or partially replaces the water used for mixing. Makes the mortars better able to bond,…
Synthetic latex specifically formulated as an additive for sand-cement mortars…