White breathable smoothing mortar for finishing plastered surfaces. Contains air-hardening and hydraulic binders, marble and quartz sand, specific additives and resins. Excellent spreadability and workability, thus very easy to apply on fresh or cured, traditional or pre-mixed, rough substrate plaster. Allows a fine float finish to be obtained. Can be used for coats up to 5 mm thick.
Conforms to Standard EN 998-1 in class CS III - W1.
PROFESSIONAL USE ONLY

Suitable application:
- Finishing lime-cement based traditional or pre-mixed plaster surfaces using the “wet-on-wet” technique.
- Finishing cured traditional or pre-mixed lime-cement based plaster surfaces.
- Levelling and smoothing cement plasters  and cement-lime mortar.
- Finishing surfaces coated with old mineral or water-based paint, gypsum-based plaster, plasterboard after application of F.28/G APPRETTO.

Coverage
1.4 kg/m2 per mm of thickness.

Application
Smooth metal trowel

Packaging
25 kg bags

TECHNICAL DATA
General purpose mortar (class GP) for indoor/outdoor plaster surfaces conforming to standard EN 998-1
Appearance: Fine white powder
Density of mixture (kg/m3): 1.750
Mixing ratio: 23-24%
Particle size: Max. 0,7 mm
Hazard classification: Consult the Safety Data Sheet
Application temperature range: from +5°C to + 35°C
Pot life of mixture: ≥ 60 min.
Maximum thickness per coat: 5 mm
Thermal resistance: From -30°C to +90°C
Time to wait before applying a second coat: 60 minutes
Time to wait before troweling: 30-120 min.
Time to wait before painting: 7 days