Waterproofing, transpiring, highly flexible, fibre-reinforced single component cement mortar.
Once blended with water, the product forms a mixture that can be easily worked with a trowel, roller or brush. It can also be applied to vertical surfaces without sagging. Once the product has hardened, it forms a flexible, waterproof layer that is highly resistant to the weather conditions.
Excellent bond to concrete, brickwork and ceramic surfaces since it contains a high percentage of synthetic resins. Complies with EN 14891 norm.
• Waterproofing balconies, terraces, bathrooms, showers, prior to laying ceramic tiles.
• Protecting plastered or concrete surfaces with cracks caused by shrinkage, or for protection
the penetration of water and the aggressive salts in the atmosphere.
• Waterproofing concrete structures, plastered surfaces and cement-based screeds.
The product must be applied in at least 2 coats, so as to obtain a final thickness
of no less than 2 mm and no more than 4 mm. Do not apply coats more than 2 mm thick. To increase the ability to withstand movements that can create cracks on the surface, insert F.25 RETE between the first and second coat.
When applying with a
roller or brush, add 5,8 liters of water to 20 kg of product. If the product is
applied with a trowel, add 5,4 liters of water per 20 kg of product.
For vertical and horizontal surfaces. For indoor and outdoor use.
1.1 kg/m2 per mm of thickness (recommended minimum thickness: 2 mm).
20 kg bags
Appearance: Grey powder
Hazard classification: Consult the technical and safety data sheets for more details
Mixing ratio: 5,4-5,8 l of water per 20 kg (5,8 l fluid consistency)
temperature range: From +5°C to +35°C
Pot-life of mixture: 60 min.
Thickness obtained: Max 4 mm (per single coat max. 2 mm)
Recommended thickness: 2/3 mm
Laying of ceramics tiles, natural stones, parquet, vinyl and composite materials:
Storage: 12 months in original packaging in a dry place