Salt-resistant, cement-free, breathable rendering mortar with semi-fluid consistency, easily workable by machine or trowel, based on lime and eco-pozzolan. Applied as a first coat under breathable and structural dehumidifying plasters, it improves adhesion, evens out substrate absorption and slows down the salt transfer process.
F.78 MUROSAN CALCE RINZAFFO must be used as a first layer, applied by machine straight onto clean masonry after the old plaster has been removed and before application of F.78 MUROSAN CALCE RISANA, in the following cases:
•
Refurbishing masonry damaged by capillary rising damp in existing buildings, also of historic and artistic importance.
• Refurbishing masonry damaged by the crumbling and flakiness caused by saline concentrations.
• Reconstruction
of old lime-based plaster damaged by the weather, environmental conditions and
wear and tear.
• Application of breathable and “structural” plaster coats when masonry is mechanically weak.
• Application of macro-porous
dehumidifying plasters both indoors and outdoors on walls affected by
capillary rising damp.
• Repairing masonry damaged by efflorescences.
• Application of dehumidifying plasters to the masonry of structures situated in lagoon
areas or near
the sea.
• Application of new dehumidifying plasters or refurbishing existing lime-based plasters in buildings of
historic and artistic interest (historic town centers, churches, manor houses, mansions) on masonry
made
of stone, bricks, tuff and mixed materials.
For indoor and outdoor use.
PROFESSIONAL USE ONLY
Coverage
7.5 kg/m2 (per 5 mm of thickness).
Packaging
20 kg bags.
TECHNICAL DATA
GP mortar “for general purposes for indoor/outdoor plaster surfaces” conforming to standard EN 998-1
Appearance: White powder
Volumic mass of powder: 1.25 g/cm3
Volumic mass of mixture: (kg/m3) 1850
Mixing
ratio: 25-27.5%
Consistency of mixture: semi-fluid
Hazard classification: Consult the technical and safety data sheets for more details
Application temperature range: from +5°C to + 35°C
Maximum size of aggregate: 2.5 mm
Pot-life
of mixture: approx. 60 minutes
Mortar porosity when fresh: 6%
Maximum thickness that can be applied: 5 mm
Storage: 12 months in original packaging in a dry place