Product hub

F.69 CERMALT

Semi-fast-drying and hardening hydraulic binder for laying substrates. For interior and exterior use.

Semi-fast-drying and hardening hydraulic binder for laying substrates. For…

F.69 CERMALT PRONTO

Premixed, ready-to-use mortar with high thermal conductivity and semi-fast drying and hardening for laying substrates.

Premixed, ready-to-use mortar with high thermal conductivity and semi-fast…

F.77 CERLIV

Fast-setting and fast-hardening cement-based self-levelling compound. For levelling substrates in thicknesses up to 10 mm per coat

Fast-setting and fast-hardening cement-based self-levelling compound. For…

F.77 CERLIV RAPIDO

Fast drying and hardening cement-based self-levelling compound, based on nanotechnological fluidifying agents and high-strength cements, special binders and synthetic additives. For levelling…

Fast drying and hardening cement-based self-levelling compound, based on…

F.77 CERLIV MAXI

Nanotechnological cement-based self-levelling agent, based on special binders and synthetic additives with rapid setting and drying. Thicknesses from 3 to 40 mm per coat. Can be applied with a pump.…

Nanotechnological cement-based self-levelling agent, based on special binders…

Odourless and colourless single-component consolidating agent with high penetration capacity based on synthetic active ingredients in water dispersion. It is suitable for treating all cement surfaces…

Odourless and colourless single-component consolidating agent with high…

F.28/G APPRETTO

Single-component primer based on synthetic resins in water dispersion. For treating gypsum, scagliola, anhydrite surfaces (after sanding) before laying ceramic or natural stone with cement-based…

Single-component primer based on synthetic resins in water dispersion. For…

F.29 ECOPRIMER t

Acrylic primer, adhesion promoter, solvent-free, with very low emission of volatile organic compounds (VOC). Vertical and horizontal surfaces. For indoor use. PROFESSIONAL USE.

Acrylic primer, adhesion promoter, solvent-free, with very low emission of…

F.87 IPERFLU

Acrylic hyperplasticiser for making mortars with a low water/cement ratio. It improves the flowability of the mix and facilitates pumping and compacting of the mortar. Provides less shrinkage and…

Acrylic hyperplasticiser for making mortars with a low water/cement ratio. It…

F.80 SGRASSANTE (Deagreser)

Concentrated alkaline detergent with high degreasing power for the preparation of old surfaces before laying new floors with adhesives, the application of self-levelling mortars (line F.77) or the…

Concentrated alkaline detergent with high degreasing power for the preparation…

F.72 ELASTOMALTA

Two-component elastic fibre-reinforced cement mortar for waterproofing balconies, terraces, bathrooms and swimming pools.

Two-component elastic fibre-reinforced cement mortar for waterproofing…

F.72 ELASTOMALTA MONO

Single-component waterproofing cement mortar with high workability.

F.25 BAND

Rubber tape for elastic joints of waterproofing systems, coated on both sides with non-woven fabric.

Rubber tape for elastic joints of waterproofing systems, coated on both sides…

F.25 BAND ADESIVA

Self-adhesive sealing tape for elastic waterproofing of floor-wall joints.

F.25 RETE

Fibreglass mesh treated with anti-alkaline primer for reinforcement of waterproofing mortars and smoothing on thermal insulation systems

Fibreglass mesh treated with anti-alkaline primer for reinforcement of…

F.75 MALTA OSMOTICA

Osmotic waterproofing cement mortar for underground walls, water retaining structures including drinking water (the product has the appropriate certification) and cellars in general. The mortar is…

Osmotic waterproofing cement mortar for underground walls, water retaining…